5 poles rotor Commutator Armature Spot Welder Fusing Hotstacking Machine
Specially designed for
Armature/rotor commutator welding with 5 poles commutator (collector)
Also we are available supply you 3 poles rotor commutator welding machine
Specially designed to
Realize best welding quality and upgrade the efficiency
by DC welding power supply (control the weld current,constant and feedback), 5 points welding at a time and air cooler
Specification:
Armature OD |
Max shaft length |
Shaft OD |
Wire OD |
Commutator OD |
| 15-100mm |
350mm |
3-15mm |
0.06-1.5mm |
5-60mm |
| Cycle time |
Output current |
Cooling mode |
Air source pressure |
Power supply |
| 1500-1800pcs/H |
4000A |
Air cooler |
0.4-0.7MPa |
380V, 50Hz |
Main Components:
| DC inverter weld power supply |
PLC |
Touchng screen |
Relay |
Frame |
| 40 |
OMRON |
VEINVIEW |
OMRON |
Aluminum alloy |
Main cared technical points of DC inverter weld power supply:
solenoid valve voltage of the pneumatic welding head:DC24V
mode: basic, dual pulse, roll weld, continuous weld
weld result figures and graph display: yes
weld program no.:64 groups
varied regulation weld: yes
secondary constant current/voltage/power: yes
 |
| welding transformer: air cooling (water cooling for option) |
| loading continuouse rate: air cooling 8%, water cooling loading 36% |
PLC control: yes
micro processor control: yes
welding counter: yes
inbuilt welding quality monitor: yes
Max output current: 4000A
The matched previous process is winding machine
WD-4-WAM
Difference between micro DC motor with carbon brush (brush DC motor) and micro DC motor without carbon brush (brushless DC motor)
DC motor with carbon brush is composed of shell embedding with magnet, rotor with commutator. It has 3 poles, 5 poles, 7 poles, 10 poles and 12 poles etc. China common model are 390,540, 550, 555, 775, 895 etc.
1. Its merits is simple control, 2 wires input, exchange them, the rotation in CCW, voltage increase brings faster speed, bigger torque.
2. It takes mechanical commutator, in high speed run, easier wear out, and generates fire sparkle, therefore demerits are noise, electromagnetic interruption, shorter life and big loss.
3. It is normally composed of N polar and S polar each or 4 pieces ferrite core or NdFeB magnet, provided NdFeB magnet applied, the OD can smaller. Also there are available with coils and stator core as the magnetic polar.
4. It is normally with internal rotor structure.
DC motor without carbon brush is composed of stator and rotor. It has 6 slots 4 poles, 9 slots 6 poles, 10 slots 8 poles, 12 slots 10 poles etc.
1. It takes electronic commutator, which named driver.
2. Brushless motor can apply the internal rotor or external rotor. The automotion scooter motor is of external rotor.
3. Brushless motor of big power normally applies ex-built controller, and small micro BLDC motor applies in-built controller. For the in-built controller, the lead wire more, positive, negative, CW, CCW control wire, speed regulate wire etc. The positive and negative wire in opposite connection will burn the driver.
4. BLDC motor normally takes NdFeb magnet as the rotor and with controller, the cost is more than DC motor with carbon brush.
Audited Supplier 
){kind=link}
){kind=link}